国际海洋工程网

Operation guide for Fire extinguisher filling equipment As a preference, the fire extinguisher filling machine is provided with a safety door on the mouth of the dry powder delivery frame, and a bottom plate is provided in the safety box.Put the fire extinguisher on the bottom plate through the dry powder delivery frame, the head of the fire extinguisher enters the dry powder filling gap, the dry powder filling head is aligned with the head of the fire extinguisher, close the safety door, the safety door is safely closed through a latch or lock, the dry powder filling head is aligned with the head of the fire extinguisher, the propulsion device pushes the dry powder filling head towards the head of the fire extinguisher, the interface is tight, after the top is tight, press down the fire extinguisher pressure handle, and then open the dry powder filling valve, and the dry powder filling begins. Since the safety door is closed, all the fire extinguisher bottles are located in the box. The fire extinguisher does not directly contact the fire extinguisher during the process of filling the dry powder. The safety box is made of materials such as steel plates to separate the body of the operator and all outside personnel from the fire extinguisher at intervals, so as to effectively protect the safety of the operator. During the specific implementation, the dry powder filling head of the fire extinguisher filling machine is aligned with the head of the fire extinguisher, and the propulsion device pushes the dry powder filling head towards the head of the fire extinguisher. The interface is tightened at the top. After the top is tightened, the valve of the dry powder filling head will automatically open. Press down the handle of the fire extinguisher, and the dry powder will start to be filled.When the dry powder filling is completed, the dry powder filling head leaves the dry powder port of the fire extinguisher head, and the valve of the dry powder filling head is automatically closed.The dry powder filling head of this structure changes the prior art to use a foot valve to control the opening and closing of the dry powder source. The dry powder between the foot valve and the dry powder filling head will be wasted during operation.Therefore, the use of a dry-filled powder head with a valve has the advantage of saving dry powder.When specifically implemented, the dry powder filling head with a valve includes a valve body and a valve core set in the valve body. The valve core is provided with a hollow dry powder guide hole, the head of the valve core is provided with a dry powder filling sealing ring, the middle of the valve core is provided with a groove, the groove is provided with a sealing ring, the tail of the valve core is provided with a step, and it is provided with a dry powder hole, the dry powder hole and the dry powder guide hole communicate, the tail of the valve core is provided with an internal thread, the tail of the valve body is provided with an external thread, the tail of the valve core is rotated with a screw with a valve sealing ring, the valve sealing ring is at the end of the valve body, and the valve body is rotated with a valve with a dry powder inlet Seat, the valve seat is provided with a spring, which is mounted on the head of the screw.  

Compared with the prior art, the beneficial effects of the new type of fire extinguisher filling machine are: Because the new type of fire extinguisher filling machine has added assembly lines, filling cabinets, automatic valve-twisting cabinets and dry powder fire extinguishing agent barrels, the design can be filled and filled with dry powder in 3 cylinders at the same time, and the filling time of 3 6-liter fire extinguishers is about 40s. It can fill 180-250 bottles per hour, realizing the integration of valve-twisting and filling, improving the filling effect, and solving the existing dry powder fire extinguisher production technology. The filling operation is slow and the filling time is long, and it is impossible to fill three fire extinguishing agent tanks at the same time. The problem is that the filling operation is slow and the filling time is long. It is impossible to fill three fire extinguishing agent tanks at the same time. .Because the new type of fire extinguisher filling machine has added three large-flow and high-pressure vortex pumps, the design provides conditions for filling three fire extinguishing agent tanks at the same time. Because the new type of fire extinguisher filling machine has added an all-stainless steel frame and a thickened stainless steel conveyor chain, a gear motor, a photoelectric limit switch, and a time controller, the design can implement automatic stop without cylinders and automatic delivery of cylinders. The new type of fire extinguisher filling machine has the advantages of automatic filling, automatic metering, automatic filling of dry powder, and no foam overflow during filling. GFM16-1B fire extinguisher dry powder filling machine Technical parameters： Filling accuracy: 1KG≤±0.02 Filling speed: 5kg/min Voltage: AC220V 50Hz                          Power: 1.1kw Weight: 90kg Volume: Length*width*height 800*400*1350mm 2223531449@qq.com

Operation method of dry powder fire extinguisher filling equipment 1. Operation： 1The filling machine should be placed horizontally in a dry, clean and ventilated place； .2The working ambient temperature of the filling machine is -5℃ to 45℃； .3 Turn on the power supply and start the filling machine. When filling the powder, first put the empty bottle of the fire extinguisher on the electronic scale, put the filling module on the mouth of the fire extinguisher bottle, and press the peel button on the electronic scale to zero.Open the filling ball valve on the filling module to start filling the powder, and at the same time insert the stainless steel powder suction tube into the powder bag or powder bucket (note: the powder suction tube should be inserted into the deepest part of the powder)； .4 Constantly move the powder suction tube to let the powder suction port suck the powder, do not let the air into the tube so as not to affect the filling speed； .5 When the filling reaches the specified weight, close the filling ball valve, remove the fire extinguisher and check the weight.； .6The optimal filling pressure during filling is -0.06MPa to -0.009MPa. When the pressure drops below -0.04MPa, the filling speed will slow down significantly. At this time, the filling ball valve can be closed and the vacuum pressure can be increased before filling.； .7 Before stopping, be sure to turn the rotating button on the control panel of the filling machine to the “cleaning” gear, and use the pulsed air flow generated during pressure relief to clean the residues on the filter element. After the vacuum pressure returns to “zero”, the total power supply can be turned off. 2. Maintenance ： .1 Keep the filling machine clean and the oil level of the vacuum pump to ensure normal operation； .2 Dry powders containing impurities, dry powders with excessive moisture content, and dry powders that are not up to standard are strictly prohibited from being used to avoid damage to the equipment； .3 The filling machine should be used for 300-500 hours, and the dry powder in the filter barrel should be cleaned.； .4 When cleaning up the dry powder, the “Clean” button should be activated. After the pressure returns to zero, take a large plastic bag to cover the filter barrel and the lower cover plate, loosen the clamp on the cover plate, remove the cover plate, and pour the dry seam into the plastic bag.； GFM16-1 automatic fire extinguisher dry powder filling machine Technical parameters： Filling accuracy: 1KG≤±0.02 Filling speed: 5kg/min Voltage: AC380V or AC220V 50Hz Power: 1.1kw Weight: 110kg Volume: Length*width*height 870*590*1320mm  

Operating procedures of automatic ultrafine dry powder filling machine The operating procedures of the fully automatic ultrafine dry powder filling machine CGFM10-2 fully automatic ultrafine dry powder filling machine adopts vacuum jet technology to quickly inhale the dry powder into the loaded cylinder, and is equipped with XK3102-B1 weighing display instrument to automate and measure the filling process.                 Operating procedures：   1. Before powering on, please make sure that the switch is set on the “off” gear.Check for circuit breakage or leakage before operation；   2. When using, first set the quality of the dry powder that needs to be filled (such as 400g). Please ensure that the box is effectively grounded to ensure safety. It is strictly forbidden to touch the electrical circuits of the box by hand or with a damp cloth when energizing.   3. When filling, press start (pump up), the vacuum pump starts to work, and then place the cylinder to be filled.After the entire filling process is over, the filled cylinder is removed and placed in a new cylinder, and the filling will start automatically.   GFM10-2 dry powder filling machine Technical parameters： Filling accuracy: 1KG≤±0.015 Filling speed: 6-12kg/min Voltage: AC220V 50Hz Power: 0.55KW Weight: 100kg Volume: Length*width*height 800*600*1220mm    

Detailed explanation of the operation method of dry powder filling machine 1. Preparation work 1.Cleaning: Before operation, the dry powder canning machine should be cleaned to ensure the hygiene and safety of the equipment. 2.Inspection: Check whether all parts of the equipment are intact, whether there are abnormal conditions such as loosening. 3.Prepare raw materials: The dry powder raw materials to be used are fully prepared, and ensure that the raw materials are clean and free of impurities. 2. Boot operation 1.Turn on the power supply: Turn on the power supply of the dry powder canning machine and turn on the main power switch. 2.Set parameters: According to the needs, set the parameters of the dry powder filling machine, including weighing data, combination data, filling speed, etc. 3.Turn on the manipulator: Turn on the manipulator and send the empty tank to the work area for filling. Three, the operation steps 1.Add raw materials: Put the prepared dry powder raw materials into the hopper. 2.Turn on the vibrator: Turn on the vibrator to ensure the smooth flow of dry powder raw materials. 3.Start filling: Through the set parameters, start the filling process and fill the dry powder into the empty tank. 4.Check the sealing: When the filling of the jar is completed, check the sealing of the jar and whether the filling amount is normal. 5.Complete the operation: When the filling work is completed, turn off the power of the equipment, clean the equipment and save it. Fourth, precautions 2223531449@qq.com 1.The equipment must be inspected and cleaned before operation to ensure the safety and hygiene of the equipment. 2.When setting the parameters, it should be adjusted according to the type of material to be filled and the packaging specifications. 3.Pay attention to maintaining the normal operation of the dry powder filling machine, and carry out regular maintenance and maintenance. 4.When a fault is found, stop in time and contact the maintenance personnel to deal with it. [Summary] This article introduces in detail the operation method of the dry powder canning machine, including preparation work, start-up operation, setting parameters, operating steps and precautions.The rational use of dry powder canning machines can improve packaging efficiency and quality, reduce production costs and labor workload. Filling precision 1kg≤+0.02 Filling speed 6-12kg/min Voltage AC380V&AC220V 50Hz Power 0.55KW&1.5KW Weight 200kg Volume length x width x height 1130x520x1350mm  

  产品概述   进入海水管系的海洋生物会在管道内壁快速地附着生长，造成海水管道系统的严重污堵，从而降低船舶的运行效率，甚至影响船舶的运行安全。    AF/HF系列电解防污防腐装置（MGPS），采用外加电流的原理，利用金属（或海水）电解产生活性金属离子（或次氯酸钠），以流动海水做介质，使电解液分布到被保护管系中，达到防止海生物附着和金属管道防腐的目的，冷凝器等海水系统的工作效率和设备性能。   该设备可广泛应用于各类船舶、海洋工程及其他海水管道系统。     产品特点   效果显著：可全面解决海水管系的腐蚀和海生物附着两大问题。管道腐蚀速度可控制在0.03mm/y以下，海生物防护效果达到96%以上；   电解原理：不采用任何化学品，安全性高、无毒、无污染；   安装简单：电极可安装在新船或旧船的海水阀箱或过滤器上；   自动运行：维护要求低，运行后无需船员经常进行管理。

  产品概述   CSWB（E）系列生活污水处理装置，是基于国际海事组织（IMO）MEPC.227(64)决议《2012年实施生活污水处理装置排出物标准和性能试验指南》，设计并制造的船用生活污水处理装置，目的在于对船舶上的生活污水进行达标处理并排放，防治水体污染，保护海洋环境。   CSWB（E）型生活污水处理装置采用电解工艺为主的方法处理生活污水，能够对船上的各种污水，包括黑水（厕所排出水、医务室排出水、活的动物处所的排出水）、灰水（处黑水外的其他废水、包括厨房排出水、洗涤排出水、洗浴排出水）等进行有效处理、排出水的水质满足MEPC,227(64)的排放要求。     产品特点   处理对象广泛-可以处理船上产生的所有生活污水   体积小、重量轻-仅为相同处理量传统污水装置的2/3   自动化、智能化-采用PLC控制，一键启动，设备监控与参数调整全自动   环境适应性强-适合所有水温、满足船舶全球航行的要求   即开即用-迅速启动，只需通电供水即可满足达标排放的要求   经久耐用-设备采用特殊防腐工艺，耐氧化，抗腐蚀   脱氮除磷-同步脱氮除磷，满足所有船舶的应用

空压机：TANABE、SAUER、SPERE、ALUP、TMC、ATLAS、COPCO、HATLAPA、HAMWORTHY、YANMAR、INGERSOLLRAND   SAUER WP101, WP110, WP151, WP220, WP185, WP220, WP250 等型号空压机配件   SPERRE HV1/140, HV1/156, HV2/200, HV2/210 等型号空压机配件

油研柱塞泵江苏销售A56-L-R-01-B-K-32   南京轩创机电贸易有限公司销售日本YUKEN油研变量柱塞泵               南京轩创机电贸易有限公司（简称“轩创液压”）成立于2006年，位于江苏省南京市。是一家批发零售：液压油泵阀门的供应商。主要产品有：德国力士乐（REXROTH），德国福伊特（VOITH），意大利维托斯（VTOZ），美国威格士（VICKERS），伊顿（EATON），日本东京计器（TOKIMEC）、油研（YUKEN）、（NACHI）、丰兴（TOYOOKI，大金（DAIKIN），法国丹尼逊（DENISON），油圣（YEOSHE），凯嘉（KCL），福南（FURNAN）油泵等等。公司目前旗下有员工38人，公司一贯坚持“用户至上，信守合同”的宗旨，凭借着高质量的产品，产品销往近三十多个省、市、自治区以及远销南非、新加坡等。   YUKEN柱塞泵 油研柱塞泵一般都由缸体、配油盘、柱塞和斜盘等主要零件组成。缸体内有多个柱塞，柱塞是轴向排列的，即柱塞的中心线平行于传动轴的轴线，因此称它为轴向柱塞泵。但它又不同于往复式柱塞泵，因为它的柱塞不仅在泵缸内做往复运动，而且柱塞和泵缸与斜盘相对有旋转运动。柱塞以一球形端头与斜盘接触。在配油盘上有高低压月形沟槽，它们彼此由隔墙隔开，有一定的密封性，它们分别与泵的进油口和出油口连通。斜盘的轴线与缸体轴线之间有一倾斜角度。   油研柱塞泵使用说明: 1、变量柱塞泵a系列液压油液：石油基液压油，可使用抗磨型液压油或r或o(防锈和***化)型液压油(iso vg2或46)，温度为0～60℃时，油的粘度范围为20至400cst。 2、变量柱塞泵a系列污染控制：必须注意油液的污染控制，否则将破坏元件和缩短元件寿命。保持污染度在nas10 级以内，吸油口必须安装至少为100üm(150目)滤油器回油路须安装一个10üm以下滤油器。 3、变量柱塞泵a系列安装：加油口位置应朝上，安装中尽量加上橡胶防震垫(客户自行购买)。 4、变量柱塞泵a系列轴的对中：尽可能使用柔性连轴器，以免由于弯曲或推力引起的任何应力。不同轴度误差应小于0.25mm(0.01in)，角度误差小于0.2°。 5、变量柱塞泵a系列吸入压力：允许吸入压力在-0.16-+0.5bar之间，吸入口配管直径与所有规定的管道法兰直径相同，变量柱塞泵的吸入口高于油箱液面，高度须小于1m。 6、变量柱塞泵a系列配管须知：连接到变量柱塞油泵上油管，应全部为软管。 7、变量柱塞泵a系列吸入管：如变量柱塞泵安装在液面以上时，吸入管和吸入管滤油器应低于变量柱塞泵的安装位置，以防空气进入吸管。由于变量柱塞泵在流量0时吸入管中液压油从停止开始运转，容易产生负压，吸入管路应采用表1尺寸，并尽量缩短。 8、变量柱塞泵a系列泄油管：安装时应***变量柱塞泵腔内压力保持低于1bar(1kgf/cm2)正常压力，冲击压力小于5bar。配管长应小于1m，管端应浸没在油中，泄油管单独接回油箱。   10、变量柱塞泵a系列起动：***次起动前，通过加油口将干净工作油液充满变量柱塞泵腔。为避免***次启动时气堵现象，调节控制阀使变量柱塞泵输出的油直接回油箱，或使执行元件在空载情况下移动11、变量柱塞泵a系列液压系统噪声振动的控制：其脉动波形与叶片泵不同，故噪音受主机的刚性、安装、配管的影响，致使噪声有增大的可能性，所以安装变量柱塞泵时需要加以注意。   YUKEN：AR变量柱塞：AR16、AR22； YUKEN：AR变量柱塞：AR16-FR01C-20 YUKEN：AR变量柱塞：AR22-FR01C-20 YUKEN：AR变量柱塞：AR16-FR01B-20 YUKEN：AR变量柱塞：AR22-FR01B-20   YUKEN：A系列 变量柱塞泵A10-F-R-01-C-K-10 YUKEN：A系列 变量柱塞泵A10-F-R-01-B-K-10 YUKEN：A系列 变量柱塞泵A10-F-R-01-H-K-10 YUKEN：A系列 变量柱塞泵A10-L-R-01-C-K-10 YUKEN：A系列 变量柱塞泵A10-L-R-01-B-K-10 YUKEN：A系列 变量柱塞泵A10-L-R-01-H-K-10   YUKEN：A系列 变量柱塞泵A16-F-R-01-C-K-32 YUKEN：A系列 变量柱塞泵A16-F-R-01-B-K-32 YUKEN：A系列 变量柱塞泵A16-F-R-01-H-K-32 YUKEN：A系列 变量柱塞泵A16-L-R-01-C-K-32 YUKEN：A系列 变量柱塞泵A16-L-R-01-B-K-32 YUKEN：A系列 变量柱塞泵A16-L-R-01-H-K-32 YUKEN：A系列 变量柱塞泵A16-F-R-01-C-S-K-32 YUKEN：A系列 变量柱塞泵A16-F-R-01-B-S-K-32 YUKEN：A系列 变量柱塞泵A16-F-R-01-H-S-K-32 YUKEN：A系列 变量柱塞泵A16-L-R-01-C-S-K-32 YUKEN：A系列 变量柱塞泵A16-L-R-01-B-S-K-32 YUKEN：A系列 变量柱塞泵A16-L-R-01-H-S-K-32   YUKEN：A系列 变量柱塞泵A22-F-R-01-C-K-32 YUKEN：A系列 变量柱塞泵A22-F-R-01-B-K-32 YUKEN：A系列 变量柱塞泵A22-F-R-01-H-K-32 YUKEN：A系列 变量柱塞泵A22-L-R-01-C-K-32 YUKEN：A系列 变量柱塞泵A22-L-R-01-B-K-32 YUKEN：A系列 变量柱塞泵A22-F-R-01-C-S-K-32 YUKEN：A系列 变量柱塞泵A22-F-R-01-B-S-K-32 YUKEN：A系列 变量柱塞泵A22-L-R-01-C-S-K-32 YUKEN：A系列 变量柱塞泵A22-L-R-01-B-S-K-32   YUKEN：A系列 变量柱塞泵A37-F-R-04-H-K-A-32366 YUKEN：A系列 变量柱塞泵A37-F-R-01-B-K-32 YUKEN：A系列 变量柱塞泵A37-F-R-01-H-K-32 YUKEN：A系列 变量柱塞泵A37-L-R-01-C-K-32 YUKEN：A系列 变量柱塞泵A37-L-R-01-B-K-32 YUKEN：A系列 变量柱塞泵A37-L-R-01-H-K-32 YUKEN：A系列 变量柱塞泵A37-F-R-01-C-S-K-32 YUKEN：A系列 变量柱塞泵A37-F-R-01-B-S-K-32 YUKEN：A系列 变量柱塞泵A37-F-R-01-H-S-K-32 YUKEN：A系列 变量柱塞泵A37-L-R-01-C-S-K-32 YUKEN：A系列 变量柱塞泵A37-L-R-01-B-S-K-32 YUKEN：A系列 变量柱塞泵A37-L-R-01-H-S-K-32   YUKEN：A系列 变量柱塞泵A45-F-R-04-B-K-10393 YUKEN：A系列 变量柱塞泵A45-F-R-01-C-K-10393 YUKEN：A系列 变量柱塞泵A45-F-R-01-H-K-10393 YUKEN：A系列 变量柱塞泵A45-F-R-01-B-K-10393 YUKEN：A系列 变量柱塞泵A45-F-R-01-C-K-10393 YUKEN：A系列 变量柱塞泵A45-F-R-01-H-K-10393   YUKEN：A系列 变量柱塞泵A56-F-R-01-C-K-32 YUKEN：A系列 变量柱塞泵A56-F-R-01-B-K-32 YUKEN：A系列 变量柱塞泵A56-F-R-01-H-K-32 YUKEN：A系列 变量柱塞泵A56-L-R-01-C-K-32 YUKEN：A系列 变量柱塞泵A56-L-R-01-B-K-32 YUKEN：A系列 变量柱塞泵A56-L-R-01-H-K-32 YUKEN：A系列 变量柱塞泵A56-F-R-01-C-S-K-32 YUKEN：A系列 变量柱塞泵A56-F-R-01-B-S-K-32 YUKEN：A系列 变量柱塞泵A56-F-R-01-H-S-K-32 YUKEN：A系列 变量柱塞泵A56-L-R-01-C-S-K-32 YUKEN：A系列 变量柱塞泵A56-L-R-01-B-S-K-32 YUKEN：A系列 变量柱塞泵A56-L-R-01-H-S-K-32   YUKEN：A系列 变量柱塞泵A70-FR01CS-60 YUKEN：A系列 变量柱塞泵A70-FR01BS-60 YUKEN：A系列 变量柱塞泵A70-FR01HS-60 YUKEN：A系列 变量柱塞泵A70-FR01KS-60   YUKEN：A系列 变量柱塞泵A90-FR01CS-60 YUKEN：A系列 变量柱塞泵A90-FR01BS-60 YUKEN：A系列 变量柱塞泵A90-FR01HS-60 YUKEN：A系列 变量柱塞泵A90-FR01KS-60   YUKEN：A系列 变量柱塞泵A100-FR01CS-60 YUKEN：A系列 变量柱塞泵A100-FR01BS-60 YUKEN：A系列 变量柱塞泵A100-FR01HS-60 YUKEN：A系列 变量柱塞泵A100-FR01KS-60   YUKEN：A系列 变量柱塞泵A145-FR01CS-60 YUKEN：A系列 变量柱塞泵A145-FR01BS-60 YUKEN：A系列 变量柱塞泵A145-FR01HS-60 YUKEN：A系列 变量柱塞泵A145-FR01KS-60       日本（YUKEN)A3H超高压变量柱塞泵    A3H16-FR01KK       日本（YUKEN)A3H超高压变量柱塞泵    A3H37-FR01KK       日本（YUKEN)A3H超高压变量柱塞泵    A3H56-FR01KK       日本（YUKEN)A3H超高压变量柱塞泵    A3H70-FR01KK       日本（YUKEN)A3H超高压变量柱塞泵    A3H100-FR01KK       日本（YUKEN)A3H超高压变量柱塞泵    A3H145-FR01KK       日本（YUKEN)A3H超高压变量柱塞泵    A3H180-FR01KK   YUKEN     DSG-01-2B2-D24-N1-50 YUKEN     DSG-01-2B3-D24-N1-50 YUKEN     DSG-01-3C2-D24-N1-50 YUKEN     DSG-01-3C4-D24-N1-50 YUKEN     DSG-01-3C12-D24-N1-50 YUKEN     DSG-01-3C10-D24-N1-50 YUKEN     DSG-03-2B2-D24-N1-50 YUKEN     DSG-03-2B3-D24-N1-50 YUKEN     DSG-03-3C2-D24-N1-50 YUKEN     DSG-03-3C4-D24-N1-50 YUKEN     EFBG-03-125-C-20T YUKEN     EFBG-03-125-C-60T YUKEN     EFBG-03-160-C-20T YUKEN     EFBG-06-250A-H-20T145

油研叶片泵江苏销售PV2R23-33-94-F-RAAA-41   南京轩创机电贸易有限公司经销日本YUKEN油研叶片泵   PV2R系列叶片泵是1984年从日本油研工业株式会社引进的80年代初的产品。它在结构上采用高次方程曲线的定子，侧板和压力板表面进行磷酸锰皮膜处理，降低了噪声，并增加了耐磨性，而且具有体积小、质量小、外形美观和安装方便等特点。适用于对环境噪声控制较严的室内机械，如塑料机械、轻工机械、铸锻机械、金属切削机床等，同时也适用于工程机械等领域。   公司介绍          日本油研工业株式会社成立于1956年，至今已有50多年历史，作为日本的液压生产厂家，油研柱塞泵产品远销世界各地。其生产的产品有：液压泵，液压阀，液压马达，电液比例控制阀、压力阀，流量阀，方向阀，油研柱塞泵、比例阀，叠加阀，插装阀，液压附属配件及液压回路设计等。该公司产品广泛应用于打包机械，注塑机械，橡胶机械，油压机械，压铸机械，塑料机械，工程机械，机床机械，锻造机械及行走机械等。   主营产品         YUKEN油研柱塞泵、YUKEN叶片泵、YUKEN电磁阀、YUKEN变量柱塞泵、YUKEN定量叶片泵、YUKEN油缸、YUKEN油泵、YUKEN液压泵、YUKEN方向阀、YUKEN流量阀、YUKEN压力阀、YUKEN液压马达、YUKEN比例阀。   产品系列          YUKEN油研柱塞泵系列有：AR16、AR22、A10、A16、A22、A37、A56、A70、A90、A100、A145、A3H；YUKEN叶片泵系列有：单联泵PVR1、PVR2、PVR3、PVR4、PV2R4A、50T、150T、PV11R、PVL；双联泵PVR12、PVR13、PVR23、PVR24、PVR34。   液压泵特点           YUKEN叶片泵具有噪声低，流量范围宽。广泛应用在轻工机械（注塑机、中空成型机、压铸机、鞋机等）。锻压机械（如弯管、油压机、折弯机等），冶金机械、港口机械等多种行业。    　　YUKEN油研柱塞泵具有节能、控制方式多样、灵活性强等特点，广泛用于注塑成形机、油压机、钢铁厂、机床、行走机械、液压电梯和环保工厂等。     型号:YUKEN-PV2R1-8-F-RAA-4222  类型:叶片泵 价格: 产地:日本 购买反馈 PV2R1-8-F-RAA-4222 介绍       PV2R1-8-F-RAA-4222 　　　　　　　　　　　　　　　　                       PV2R1----PV2R系列单泵       8------泵排量 :6，8，10，12，14，17，19，23，25，31   F------安装方式 ：L：底座式  F：法兰式   R------（从轴伸端看）顺时针方向转 标准   A----输出油口位置：上方（标准）   A----吸入口位置：A上方,B:下方，R：右方，L：左方   4222----设计号 ：4222，41，40，31，30   PV2R1、PV2R2、PV2R3、PV2R4 , 双联泵PV2R12、PV2R13. PV2R14.PV2R23、PV2R24、PV2R33、PV2R34 产品。 型号： YUKEN：PV2R系列 叶片泵PV2R1-6-F-RAA-41 YUKEN：PV2R系列 叶片泵PV2R1-8-F-RAA-41 YUKEN：PV2R系列 叶片泵PV2R1-23-F-RAA-41 YUKEN：PV2R系列 叶片泵PV2R1-25-F-RAA-41   YUKEN：PV2R系列 叶片泵PV2R2-26-F-RAA-41 YUKEN：PV2R系列 叶片泵PV2R2-33-F-RAA-41 YUKEN：PV2R系列 叶片泵PV2R2-41-F-RAA-41 YUKEN：PV2R系列 叶片泵PV2R2-47-F-RAA-41 YUKEN：PV2R系列 叶片泵PV2R2-65-F-RAA-41 YUKEN：PV2R系列 叶片泵PV2R2-75-F-RAA-41   YUKEN：PV2R系列 叶片泵PV2R3-52-F-RAA-41 YUKEN：PV2R系列 叶片泵PV2R3-60-F-RAA-41 YUKEN：PV2R系列 叶片泵PV2R3-66-F-RAA-41 YUKEN：PV2R系列 叶片泵PV2R3-76-F-RAA-41 YUKEN：PV2R系列 叶片泵PV2R3-116-F-RAA-41 YUKEN：PV2R系列 叶片泵PV2R3-125-F-RAA-41   YUKEN：PV2R系列 叶片泵PV2R4-136-F-RAA-41 YUKEN：PV2R系列 叶片泵PV2R4-153-F-RAA-41 YUKEN：PV2R系列 叶片泵PV2R4-184-F-RAA-41 YUKEN：PV2R系列 叶片泵PV2R4-200-F-RAA-41 YUKEN：PV2R系列 叶片泵PV2R4-237-F-RAA-41   YUKEN：PV2R系列 叶片泵 PV2R12-6-26-F-RAA-40 YUKEN：PV2R系列 叶片泵 PV2R12-6-26-L-RAA-40 YUKEN：PV2R系列 叶片泵 PV2R12-6-33-F-RAA-40 YUKEN：PV2R系列 叶片泵 PV2R12-8-26-F-RAA-40 YUKEN：PV2R系列 叶片泵 PV2R12-8-26-L-RAA-40   YUKEN：PV2R系列 叶片泵 PV2R13-25-52-F-RAAA-41 YUKEN：PV2R系列 叶片泵 PV2R13-25-60-F-RAAA-41 YUKEN：PV2R系列 叶片泵 PV2R13-25-66-F-RAAA-41  YUKEN：PV2R系列 叶片泵 PV2R13-25-76-F-RAAA-41 YUKEN：PV2R系列 叶片泵 PV2R13-31-76-F-RAAA-41 YUKEN：PV2R系列 叶片泵 PV2R13-31-94-F-RAAA-41   YUKEN：PV2R系列 叶片泵 PV2R14-6-136-F-RAAA-31 YUKEN：PV2R系列 叶片泵 PV2R14-12-136-F-RAAA-31 YUKEN：PV2R系列 叶片泵 PV2R14-14-200-F-RAAA-31 YUKEN：PV2R系列 叶片泵 PV2R14-14-237-F-RAAA-31   YUKEN：PV2R系列 叶片泵 PV2R23-26-108-F-RAAA-41 YUKEN：PV2R系列 叶片泵 PV2R23-33-76-F-RAAA-41 YUKEN：PV2R系列 叶片泵 PV2R23-33-85-F-RAAA-41 YUKEN：PV2R系列 叶片泵 PV2R23-33-94-F-RAAA-41   YUKEN：PV2R系列 叶片泵 PV2R23-41-108-F-RAAA-41 YUKEN：PV2R系列 叶片泵 PV2R23-41-66-F-RAAA-41 YUKEN：PV2R系列 叶片泵 PV2R23-41-76-F-RAAA-41 YUKEN：PV2R系列 叶片泵 PV2R23-41-85-F-RAAA-41 YUKEN：PV2R系列 叶片泵 PV2R23-47-108-F-RAAA-41   YUKEN：PV2R系列 叶片泵 PV2R33-76-66-F-RAAA-31 YUKEN：PV2R系列 叶片泵 PV2R33-76-76-F-RAAA-31 YUKEN：PV2R系列 叶片泵 PV2R33-76-94-F-RAAA-31 YUKEN：PV2R系列 叶片泵 PV2R33-94-76-F-RAAA-31 YUKEN：PV2R系列 叶片泵 PV2R33-94-94-F-RAAA-31 YUKEN：PV2R系列 叶片泵 PV2R33-94-116-F-RAAA-31   YUKEN：PV2R系列 叶片泵 PV2R34-116-136-F-RAAA-31 YUKEN：PV2R系列 叶片泵 PV2R34-116-153-F-RAAA-31 YUKEN：PV2R系列 叶片泵 PV2R34-116-184-F-RAAA-31 YUKEN：PV2R系列 叶片泵 PV2R34-116-200-F-RAAA-31 YUKEN：PV2R系列 叶片泵 PV2R34-116-237-F-RAAA-31 YUKEN：PV2R系列 叶片泵 PV2R34-125-237-F-RAAA-31